Do you know where your septic tank is? Okay, so you can point to an area on your property and say “yeah, it’s there” with a hint of un-sureness. Another real question is most likely more valuable then the one just asked. Do you know where the cover to your septic tank is? Does that have you scratching your head?
Septic tanks by their very nature are buried, sometimes 3 feet or deeper underground. Out of sight out of mind as it were. But that’s not necessarily the best thing. There will come a time when your septic system actually starts to exhibit problems and requires some maintenance/repairs and also the tank has to be pumped out. Possessing a general idea regarding the location of the tank can make getting this easy task done a lot more difficult.
The two main ways to deal with this challenge and one way to ensure that down the road it won’t be an issue. First let’s examine choosing the lid for the septic tank should you don’t know where it is. You can either dig because of it yourself or hold the septic pumping service practice it. Carrying it out your self can be time consuming and not a lot of fun. Getting the pumping service get it done can be costly.
Generally it really is completed in this fashion. You or someone you hire must dig down until they discover the top from the septic tank. That is generally the easy portion of the process. Once you see the top from the tank then you must find the lid. This can involve digging concentric circles outward from the initial hole until you get the lid. Once you find the lid now is the time to fix the problem; install a riser.
A septic tank riser is basically a sizable tube that extends through the lid in the tank approximately the top of the ground. Once installed it can provide quick accessibility septic tank that’s readily available any moment there exists a problem or it needs to be pumped out.
There are three basic types of risers to pick from; concrete, PVC, and polyethylene.
While concrete risers are generally cheaper it isn’t the best option. A concrete riser is heavy and may need heavy equipment to lift and set it up. It is additionally more apt to leak then this other materials and may have rust problems if rebar can be used to boost the cement.
PVC and polyethylene risers are lightweight as well as simple to install. They are resistant to corrosion and of course is not going to rust. They also add a gasket seal to keep water from entering preventing sewer gases from escaping from the leaky lid. The improved price of these two types of risers is well worthwhile. They may be virtually maintenance free and will easily last for your life of the whole septic system.
Every septic tank needs a riser as well as in a multitude of locations they are now a code requirement. In the event you don’t have one it might be worth having one installed before something goes wrong along with your septic system. Quick accessibility tank is one of bawvgx first steps to diagnosing any problems.
A properly designed septic system could keep maintenance issues and problems to a minimum. Should you be considering installing or replacing a septic system a local septic tank pumping service can point you in the right direction. For more information on septic tank pumping and design please click here.